High lumen waterproof IP67 outdoor 60w 50w 40w 30w LED street light

30W LED street light has a new design for heat removal.Heat sinks for 30w LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light. LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment.

30w LED street light  SL09 description

1、 Integration of lamp housing heat dissipation technology.
2、 Double-coupling IP67 protection, highest waterproof level.
3、 Ergonomic light distribution to achieve uniform illuminating effect.
4、 Intelligent constant current driver, long life span.


30w LED street light advantage

An LED light street based on a 901-milliwatt output LED can normally produce the same amount of (or higher) luminance as a traditional light, but requires only half of the power consumption. LED light street does not typically fail, but instead decreases in output until it needs to be replaced. It is estimated that installation of energy efficient street lighting in the 10 largest metropolitan areas in the U.S. could reduce annual carbon dioxide emissions by 1.2 million metric tons, the equivalent of taking 212,000 vehicles off the road, and save at least $90 million annually in electricity costs.

LED light street  SL09 specification

Model No.:         SL09-30W
Power(W):          30W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP67

Model No.:         SL09-50W
Power(W):          50W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP67


30w LED street light  SL09 for sale
30w LED street light  SL09 for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 30w LED street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

30w LED street light Services&FAQ

Q1:How To Order ?

A:Step 1.please tell us what model and quantity you need.
Step 2.then we will make a PI for you to confirm the order details.
Step 3.when we confirmed everything, can arrange the payment.
Step 4.finally we deliver the goods within the stipulated time.

Q2:When will make delivery ?

A:Delivery Time
-Sample Order: 1-3 days after receipt of the full payment.
-Stock Order: 3-7days after receipt of the full payment.
-OEM Order: 12-20days after receipt of the deposit.

Q3:After-sales Service?

A:1 year warranty for all kinds of products.If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.

Q4:What is your terms of Payment?

A:T/T, Western Union, Moneygram ,Escrow.

Q5:What is your transportation?

A:Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.

Q6:Do you support drop shipping?

A:Yes,your drop shipping is aviable.


http://www.jr-lighting.com/sl09-15541043133023624.html

High quality of 40w 80w 100w 120w 150w 200w ip65 LED light street highway street lamp for street

The primary appeal of LED light street is energy efficiency compared to conventional street lighting fixture technologies such as high pressure sodium (HPS) and metal halide (MH). Research continues to improve the efficiency of newer models of LED street lights.

LED light street  SL08 description

1、 High performance aluminum (ADC12) die-casting lamp heatsink with good thermal conductivity.
2、 Aluminum heatsink housing using Akzo Nobel powder coating or Dupont powder coating with high temperature baking process after polishing, cleaning, oil removal, repairing, sandblasting, with clear and gloss surface and strong corrosion resistance.
3、 The chip bottom of heat conducting surface processed by CNC machine to be smooth after heatsink powder coated, make the SMD and heatsink surface to be coincided with better heat conducting and heat dissipating.
4、 Light luminous surface using high-definition glass lens, the light will be efficient gathered around 140 degrees left and right, 75 degrees back and front, with stronger light penetration.
5、 100% of exposed screws on the outside of lamp use 304# stainless steel, pass 48 hours salt-spray test.


LED light street advantage

An LED light street based on a 901-milliwatt output LED can normally produce the same amount of (or higher) luminance as a traditional light, but requires only half of the power consumption. LED light street does not typically fail, but instead decreases in output until it needs to be replaced. It is estimated that installation of energy efficient street lighting in the 10 largest metropolitan areas in the U.S. could reduce annual carbon dioxide emissions by 1.2 million metric tons, the equivalent of taking 212,000 vehicles off the road, and save at least $90 million annually in electricity costs.

LED light street  SL08 specification

Model No.:         SL08-100W
Power(W):          100W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP65

Model No.:         SL08-200W
Power(W):          200W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP65


LED light street  SL08 for sale
LED light street  SL08 for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include LED light street, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

LED light street Services&FAQ

Q1. Can I have a sample order for LED light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for LED light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT.
It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for LED light?
A: Firstly,let us know your requirements or application.
Secondly,We quote according to your requirements or our suggestions.
Thirdly,customer confirms the samples and places deposit for formal order.
Fourthly,We arrange the production.
Q6. Is it OK to print my logo on LED light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8:How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity.
For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

http://www.jr-lighting.com/sl08-15541042412081729.html

Best Price module designed ip65 Rotatable 100w 150w 200w 240w 300w LED street light for Public Street Lighting

300w led street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts. In manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

300w led street light  SL07 description

1、 The light body is designed by mimic fluid dynamics, simple and beauty, ultraviolet corrosion resistant treatment on the surface
2、 Module designed, the power can be customized, meet the needs of various occasions
3、 Dustproof light body is helpful for LED dissipation, so the LED light can be worked on the best temperature environment, ensure the lamp source and power supply working time
4、 Constant current constant voltage control, steady light effect, avoids eye irritation and fatigue from the driving


300w led street light lightning protection

300W LED street light is made of conductor material, which is equivalent to a lightning rod. In the design, downlead and ground grid must be installed. These systems constitute the external lightning protection system. The system can avoid the fire and personal safety accidents caused by direct lightning. Internal lightning protection system refers to the protection of the equipment inside the street lamp through grounding, setting voltage protection and other ways. The system can prevent induction lightning and other forms of over-voltage intrusion, resulting in power damage, which is not guaranteed by the external lightning protection system. The two are complementary. The internal lightning protection system should be connected with the external lightning protection system or set with over-voltage protector and equipotential connection in many devices, such as the shell, cables and metal pipes in and out of the protection area.


300w led street light  SL07 specification

Model No.:         SL07-300W
Power(W):          300W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP65

Model No.:         SL07-350W
Power(W):          350W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Waterproof:          IP65



300w led street light  SL07 for sale


300w led street light  SL07 for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 300w led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

300w led street light Services&FAQ

- Q: Do you offer OEM service?

A: Yes, we do and there is no extra cost for our OEM service if order quantity over 500pcs. The OEM cost is already included in our prices.

-  Q: Can I Order samples from you?
A: Yes, samples are available.

-  Q: What’s the leading time? (How long do you need to prepare my goods?
A: 1-2days for sample orders. 3-7days for mass production orders (based on different quantities).

-  Q: How will you deliver my goods to me?
A: We always ship by air and sea. In the mean time, we cooperate with international expresses such as DHL, UPS, FedEx, TNT to enable our customers get their goods rapidly.

- Q: How long do I need to wait before my goods arrive?
A: 5-7 days for air transportation, 3-5 days for international express. 20-40 days for sea transportation.

-   Q: Can you put my brand name (logo) on these products?
A: Yes, of course. OEM service is the most important part of our trade purpose.

-   Q: Can you customize and design products for us?
A: Yes. We have a professional R&D team including optics engineers who are proficient in DIALUX design, structural engineers who are proficient in CAD, PR/E design and heat dissipation treatment, and electronic engineers who are proficient in PCB design and electrical design of drivers.



http://www.jr-lighting.com/sl07-15541042210531932.html

Super bright 150lm/w IP65 Outdoor Road 150w led street light for sale

150W LED street light has novel appearance design, ingenious structure and full of modern breath, which is in line with the trend of the times. In terms of heat dissipation, we creatively adopt the design scheme of air convection cavity type aluminum radiator. The radiator has two upper and lower layers of heat dissipation surfaces, the middle of which is connected by eight vertical bars, and the front and back are transparent. At the same time, there are air convection holes on the left and right sides, which enhances the air circulation inside the cavity It is conducive to heat removal, thus effectively improving the heat transfer efficiency of LED light source.


150w led street light  SL06 description

1、 Using die-casting aluminum material,innovated design, free tool for maintain.
2、Cutout switch, NEMA control system optional. For A60, A80 street lamp hole. Adjustable angle: -10°～15°
3、 Adopting Lepower self-developed lighting source and ● ZAG lens tech, light efficiency raised 8% and light transmittance reaches up to 98% when compared to similar products.
4、 The use of duct cooling design reduces the overall weight.Excellent heat dissipation and low light decay effectively extend the service life.
5、 Energy savings of up to 60% thanks to its low power consumption and use of high efficiency constant current driver.Protected from over current, over voltage, lightning and high temperature and fully guarantee the product life and stability.
6、 Green lighting source without UV light, infrared radiation and mercury pollution.
7、 Each LED is packaged with multi-chips, high efficiency, stable performance and low light decay.
8、 Various housing colors available.


150w led street light   advantage

The 150W LED street light adopts the unique secondary optical lens module and the "strip spot" light design. The length of light spot is determined by the light angle of LED, so as to reasonably control the light distribution, avoid the superposition waste of light, reduce the light loss, realize the connection of the strip light spots between the light poles, and make them reach the brightness index stipulated by the national standard. In order to ensure the ideal illumination and uniformity of the road surface, the function of eliminating led glare and protecting LED light source is eliminated.


150w led street light  SL06 specification

Model No.:         SL06-150W
Power(W):          150W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65

Model No.:         SL06-250W
Power(W):          250W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65


150w led street light  SL06 for sale
150w led street light  SL06 for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 150w led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

150w led street light Services&FAQ

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pcs for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days  to arrive. Airline and sea shipping also optional

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.


http://www.jr-lighting.com/sl06-15541030603703757.html

High power ip65 outdoor waterproof modular 20w 50w 100w 150w 180w 200w led street light

Our 200w led street light are very hot in the led light market.Independently developed and designed metal bolt type high power LED light source. In order to improve the stability of the product, we use the high-quality LED light-emitting chip imported from the United States, which is directly packaged on the top of the nut of the metal bolt. When the product is assembled, the LED metal bolt is directly screwed on the aluminum radiator, so as to effectively integrate the LED and the radiator, changing the traditional high-power LED light source to conduct heat with the help of heat-conducting silica gel At present, it greatly improves the heat transfer efficiency between LED and aluminum radiator, and effectively guarantees the service life of LED light source over 60000 hours. At the same time, Taiwan's high-quality fluorescent powder is used to make the brightness of a single LED reach more than 80 lumens, and there are a variety of color temperature options, which can meet the needs of different occasions for different color temperature.


200w led street light SL05 description


1、 High performance aluminum (ADC12) die-casting lamp heatsink with good thermal conductivity.
2、Aluminum heatsink housing using Akzo Nobel powder coating or Dupont powder coating with high temperature baking process after polishing, cleaning, oil removal, repairing, sandblasting, with clear and gloss surface and strong corrosion resistance.
3、 The chip bottom of heat conducting surface processed by CNC machine to be smooth after heatsink powder coated, make the SMD and heatsink surface to be coincided with better heat conducting and heat dissipating.
4、 Light luminous surface using high-definition glass lens, the light will be efficient gathered around 140 degrees left and right, 75 degrees back and front, with stronger light penetration.
5、 100% of exposed screws on the outside of lamp use 304# stainless steel, pass 48 hours salt-spray test.


200w led street light  advantage

200w led street light adopts the unique secondary optical lens module and the "strip spot" light design. The length of light spot is determined by the light angle of LED, so as to reasonably control the light distribution, avoid the superposition waste of light, reduce the light loss, realize the connection of the strip light spots between the light poles, and make them reach the brightness index stipulated by the national standard. In order to ensure the ideal illumination and uniformity of the road surface, the function of eliminating led glare and protecting LED light source is eliminated.


200w led street light  SL05 specification

Model No.:         SL05-200W
Power(W):          200W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65

Model No.:         SL05-100W
Power(W):          100W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65



200w led street light  SL05 for sale


200w led street light  SL05 for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 200w led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

Why Choose our 200w led street light?

1.Patent design,which means a huge market.

2.If you are the new start company,you get a big business chance but don't know what to do?

We have so many professional engineers,they will help you design it,make the light   simulation,offer all the information that your customer need,also our engineers can  go to your country if necessary.

3.We are the manufacturer,we custom-make any design for you.

4.Are you still worry after payment supply disapear and you can't get the goods?

Don't worry,We are the member of Trade Assurance service in Alibaba, protect buyers’ payment to suppliers,and to ensure suppliers fulfill their obligations regarding order delivery time and product quality.

5.Lifespan 50000hours,3 years warranty,for any quality issue within 3years,We will cover all the cost.



http://www.jr-lighting.com/sl05-15541030410238247.html

High quality aluminum outdoor waterproof ip65 50w 100w 150w 200w 240w led street light

50w led street light is closely related to people's production and life. With the acceleration of urbanization in China, LED street lamps have gradually entered people's field of vision with the advantages of directional lighting, low power consumption, good driving characteristics, fast response, high seismic resistance, long service life, green environmental protection, etc., and become the new generation of energy-saving light sources with the most advantages of replacing traditional light sources in the world. Therefore, LED street lamps It will be the best choice of road lighting energy-saving transformation.


50w led street light SL04 description

1、High performance aluminum (ADC12) die-casting lamp heatsink with good thermal conductivity.
2、 Aluminum heatsink housing using Akzo Nobel powder coating or Dupont powder coating with high temperature baking process after polishing, cleaning, oil removal, repairing, sandblasting, with clear and gloss surface and strong corrosion resistance.
3、 The chip bottom of heat conducting surface processed by CNC machine to be smooth after heatsink powder coated, make the SMD and heatsink surface to be coincided with better heat conducting and heat dissipating.
4、 Light luminous surface using high-definition glass lens, the light will be efficient gathered around 140 degrees left and right, 75 degrees back and front, with stronger light penetration.
5、 100% of exposed screws on the outside of lamp use 304# stainless steel, pass 48 hours salt-spray test.


50w led street light advantage

50w led street light has automatic control energy-saving device, which can achieve the maximum possible power reduction and power saving under the condition of meeting the lighting requirements of different periods. It can realize computer dimming, time-sharing control, light control, temperature control, automatic inspection and other humanized functions.
Long service life: can use more than 50000 hours, provide three years of quality assurance. The disadvantage is that the life of the power supply is not guaranteed.
High light efficiency: chip with ≥ 100lm can save more than 75% energy compared with traditional high pressure sodium lamp.
Simple installation: no need to bury cables, no need for rectifiers, etc., directly connect the lamp pole or nest the light source into the original lamp shell.
Excellent cooling control: the temperature is controlled below 45 ℃ in summer, and passive cooling mode is adopted, so the cooling guarantee in summer is insufficient.


50w led street light SL04 specification

Model No.:         SL04-50W
Power(W):          50W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65

Model No.:         SL04-180W
Power(W):          180W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Waterproof:          IP65



50w led street light for sale


50w led street light for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 50w led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

The faq of 50w led street light

1. What are your market reach throughout the regiion?

Our markets around the world in every corner, we have many years of experience in foreign trade.Our clients are from different countries.


2. Whar are your main products?

Our main products are led outdoor lightings including led flood light( stadium lighting), led high bay light, led street lighting and led garden light.


3. Are you a manufactuer or a trading company?

We are a professional LED manufacturer.


4. Do you have the ability to do independent research and development?

Our engineering department have the research and development capabilities. We also collect regular customer feedback to research new product.


http://www.jr-lighting.com/sl04-15541028641963854.html

Wholesale New Lamps IP65 Waterproof SMD 30W 60 90 100 watt led street light for sale

The color rendering index of 100 watt led street light is much higher than that of high-pressure sodium lamp. The color rendering index of high-pressure sodium lamp is only about 23, while the color rendering index of LED street lamp is more than 75. From the perspective of visual psychology, the illumination of LED street lamp can be reduced by more than 20% on average compared with that of high-pressure sodium lamp.100 watt led street light has automatic control energy-saving device, which can achieve the maximum possible power reduction and power saving under the condition of meeting the lighting requirements of different periods. It can realize computer dimming, time-sharing control, light control, temperature control, automatic inspection and other humanized functions.


100 watt led street light SL03 description

1、Modularization & plug technology, convenient maintenance, no need any tools.
2、Cellular heat dissipation and the whole structured dissipation technology, good heat dissipation performance.
3、Double coupling IP65 protection level, super waterproof performance.
4、Single LED lamp damaged does not affect the other lamp working.
5、Multi-channel constant current driver power supply, single module can be hot plug.
6、Human ergonomics light distribution, uniform road lighting.
7、Multiple modules free combination, so the LED modulariztion provides a great lighting solution for industrial applications.

100 watt led street light shape structure

For the external protection of 100 watt led street light, it is recommended to use soft ceramic heat dissipation paint for LED lamps. This spray type soft ceramic heat dissipation paint can be directly sprayed on the outside of LED lamps and lanterns, which is easy to operate and can be adapted to various shapes of heat dissipation structures, and can also be adjusted to different colors to meet the needs of landscape design. The soft ceramic particles in the spray type heat dissipation paint are treated by nano technology. The fine particles are not only easy to be operated by the spray gun, but also make the heat conduction particles on the same coating area more and denser, make the area of temperature volatilization and dissipation larger, and make the heat energy of LED lamps quickly transmit out. Soft ceramic heat dissipation paint is a thermosetting material, which conforms to ROHS environmental protection and Safety specifications. The construction procedure is simple and does not need any special machines and tools. After baking, it can withstand the high temperature of LED for a long time without quality change. LED street lights, LED landscape lights, or LED billboards that are used outdoors will also face acid and alkali damage from wind and rain, acid rain, bird droppings, air dust, black smoke emissions, etc. Therefore, the spray type soft ceramic heat dissipation paint must have the characteristics of acid and alkali resistance, and the range of acid and alkali resistance is PH3 ~ 11, which can effectively protect the appearance of LED outdoor lamps from erosion.

100 watt led street light SL03 specification

Model No.:         SL03-100W
Power(W):          100W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
LED:                      Epistar/CREE


Model No.:         SL02-180W
Power(W):          180W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
LED:                      Epistar/CREE


100 watt led street light for sale
100 watt led street light for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 100 watt led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

The faq of 100 watt led street light

Q:Are you a manufacturer or a trade company?
A:We are a manufacturer,specialize in making solar LED flood lights and solar LED street lights.

Q:Can I buy samples placing orders?
A:Yes.Please feel free to contact us.

Q:How much is the freight cost of samples?
A:It’s depends on weight,packing size and destination.Please contact us if you need,we can get the quote for you.

Q:How do your factory control quality?
A:We have 4 times inspection by QC before shipping.The first time is for raw material,the second and third times are for appearance and function,and the final is for packing.



http://www.jr-lighting.com/sl03-15541028115083126.html

Manufacturer Waterproof IP65 outdoor 180 120 100 60 watt led street light

60 watt LED street light is a popular product.We independently developed and designed metal bolt type high power LED light source. In order to improve the stability of the product, we use the high-quality LED light-emitting chip imported from the United States, which is directly packaged on the top of the nut of the metal bolt. When the product is assembled, the LED metal bolt is directly screwed on the aluminum radiator, so as to effectively integrate the LED and the radiator, changing the traditional high-power LED light source to conduct heat with the help of heat-conducting silica gel At present, it greatly improves the heat transfer efficiency between LED and aluminum radiator, and effectively guarantees the service life of LED light source over 60000 hours. At the same time, Taiwan's high-quality fluorescent powder is used to make the brightness of a single LED reach more than 80 lumens, and there are a variety of color temperature options, which can meet the needs of different occasions for different color temperature.

60 watt led street light SL02 description

1、The light body is designed on the basis of fluid dynamics, simple and decent, UV-resistance and corrosion treatment applied to the surface
2、 Modular designed, the power can be customized, meet the needs of various occasions
3、 Dustproof light body is helpful for LED dissipation, so the LED light can be worked on the best temperature environment, ensure the lamp source and power supply working time
4、 Constant current constant voltage control, steady light effect, avoids eye irritation and fatigue from the driving


60 watt led street light shape structure

60 watt led street light Is a well-designed product.The appearance design is novel, the structure is ingenious, full of modern breath, in line with the trend of the times. In terms of heat dissipation, we creatively adopt the design scheme of air convection cavity type aluminum radiator. The radiator has two layers of heat dissipation surface, the middle is connected by eight vertical bars, front and back are transparent, at the same time, there are air convection holes on the left and right sides, which strengthens the air circulation in the cavity and is conducive to heat Discharge, thus effectively improving the heat transfer efficiency of LED light source. The above unique heat dissipation design scheme ensures the safe working temperature of high-power LED light source below 45 ℃.

60 watt led street light SL02 specification

Model No.:         SL02-60W
Power(W):          60W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Packing size(mm) : 550×240×140


Model No.:         SL02-180W
Power(W):          180W
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Packing size(mm) : 930×410×210


60 watt led street light for sale
60 watt led street light for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 60 watt led street light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

The faq of 60 watt led street light
Q1: Can I have a sample order for led light?
A1: Yes, we welcome sample order to test the quality and Market.

Q2: What about the delivery time ?
A2: Sample order needs 3-5 days, mass production need 15 days.

Q3: Is it okay for printing our Logo on led light ?
A3: No proble, but need your quatity reach at least 200 pcs.

Q4: How do you control the quality ?
A4: We will choose best quality material, after finishing the items, also will do the anging Test for at 4 hours

Q5: Does your company provide warranty for led light.
A5: Sure, all of our items, we provide at least 3 years warranty.


http://www.jr-lighting.com/sl02-15541027861545349.html

Factory Direct Sale IP65 waterproof outdoor cob 50W 100W 150W 200W 280W led street light fixture

Led street light fixture is different from conventional street lamp. LED light source adopts low-voltage DC power supply, high-efficiency white light synthesized by blue LED and yellow. It has unique advantages of high efficiency, safety, energy saving, environmental protection, long life, fast response speed, high color rendering index, etc. it can be widely used in the road. The outer cover can be made, with high temperature resistance up to 135 degrees and low temperature resistance up to - 45 degrees.





Led street light fixture SL01 description

1、 Use imported integrated LED, high light efficiency, slow light depreciation
2、Die-casting aluminum shell, surface electrostatic spraying, anti-corrosion treatment
3、 The structure of the people-oriented design concept, easy for installation and maintenance
4、 V-shaped thermal conductivity and diversion fin design, dustproof, control the dissipation in good performance
5、 Power supply and lamp source circuit with the plug and play connectors, easy for installation and maintenance



Led street light fixture technical principle

Traditional Led street light fixture design focuses on the lumen number of LED, but less attention is paid to the heat dissipation. In fact, the lumens of LEDs are increasing rapidly. In 2009, the number of lumens per watt of mass-produced LED has reached 100 lumens, and this number is growing rapidly. The corresponding theoretical system of heat transfer has been mature, and the heat transfer means we can use are basically clear: conduction, convection, radiation and phase change heat transfer. Therefore, the measures we can take in heat transfer or heat dissipation are visible and limited.

Led street light fixture SL01 specification

Model No.:         SL01-100W
Power(W):          100W
COB:                   2
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Packing size(mm) : 760×300×155


Model No.:         SL01-280W
Power(W):          280W
COB:                   4
Light Efficiency:   100-150Lm/W
Voltage(V):          AC100-277V
CRI(Ra):               >70
Power Factor：    >0.95
CCT(K):                3000~6000
Environment   Temperature :-40~50℃
Life Time(H) :         ≥50000
Ctn/Pcs:                1
Packing size(mm) : 1150×445×175


Led street light fixture for sale


Led street light fixture for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include Led street light fixture, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

Led street light fixture Installation

Hid lamp can be divided into three series: 900 series, H series and D series. (D series is usually Lens Series)

1. Please cut off power before installation or changing spare parts
2. Please read the specification printed on fixture carefully before using
3. Please make sure the wire connection is well insulated and waterproof
4. Only professionals can do installation and maintenance

http://www.jr-lighting.com/sl01-15541027407846146.html

Hot Sale 400W 1000W hps/mh hid lamp for city flood lighting, especially for mobile lighting towers

Hid lamp has high energy density and light intensity. The improvement of the brightness of the car lights also effectively expands the visual range in front of the car, thus creating a safer driving condition. Since xenon lamp has no filament, it will not be scrapped due to filament breakage. Its service life is much longer than that of halogen lamp. The service life of xenon lamp is equivalent to the total operation time of the average service life of the vehicle.

Hid lamp JR109 description

1、High pressure die cast aluminum alloy housing, high intensity, high tenacity, electrostatic thermal spray-paint, corrosion resistant, strong and durable
2、High purity imported aluminum reflector, with a reflectivity of up to 95%
3、5mm thermostable ultra white tempered glass, good light transmittance, effectively reduces light fixture temperature, prolongs the life of lamp
4、Imported respirator, effectively ensures the internal and external pressure balance of the light fixture prolongs the life of the lamp
5、Thermostable silicone rubber gasket, good sealing, superior anticorrosive performance
6、Equipped with a strong anti-vibration system, super anti-vibration lamp head, prevents lamp falls, and effectively prolongs the life of lamp
7、Hinge fixed on glass, glass will not fall when opened, better security performance


Hid lamp JR109 application

Hid lamp, also known as HID gas discharge headlamp in the field of automobile lamp. It is to replace the traditional tungsten wire with high pressure xenon wrapped in quartz tube to provide higher color temperature and more concentrated lighting.

Hid lamp JR109 specification

Model No.:      JR109-400W
Power(W):       400W
Lamp:              HPS400W-T
Lamp holder:   E40/E39
Luminous Flux:48000lm
CCT(K):            2000
Life Time：       24000H
Lamp Voltage:  105
N.W:     5.9KGS
G.W:     7.0KGS
Size:      500×380×315


Model No.:      JR109-1000W
Power(W):       1000W
Lamp:              MH1000W-TT
Lamp holder:   E40/E39
Luminous Flux:110000lm
CRI(Ra):            70
Life Time：       10000H
Lamp Voltage:  263
N.W:     5.9KGS
G.W:     7.0KGS
Size:      500×380×315


Hid lamp for sale
Hid lamp for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include hid lamp, LED Street Light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

Hid lamp Installation

Hid lamp can be divided into three series: 900 series, H series and D series. (D series is usually Lens Series)

1. Please cut off power before installation or changing spare parts
2. Please read the specification printed on fixture carefully before using
3. Please make sure the wire connection is well insulated and waterproof
4. Only professionals can do installation and maintenance

http://www.jr-lighting.com/jr109-15505578888272671.html

Wholesale Price 1000W hps/mh floodlight hid light bulbs

The principle of HID light bulbs are to fill the UV cut anti UV crystal quartz glass tube with a variety of chemical gases, most of which are xenon and iodide, etc., and then through the booster (ballast), the 12 volt DC voltage on the vehicle is boosted to 23000 volts in a moment, and the xenon electrons in the quartz tube are excited to dissociate through the high-voltage amplitude, between the two electrodes To produce a light source is called a gas discharge. The white super arc light produced by xenon can improve the color temperature value of light, which is similar to the sunlight in the daytime. The HID light bulb needs only 3.5A current when it works, which is three times brighter than the traditional halogen bulb, and its service life is 10 times longer than the traditional halogen bulb.

Hid light bulbs JR107 description

1、High purity aluminum housing, high intensity, good heat dissipation
2、The reflective surface is polished and oxidized, uniform lighting, high reflectivity
3、Electrostatic spray coating on the surface of light fixture, beautiful and durable
4、5mm tempered glass transparent cover, good light transmittance
5、Backside opening device, maintenance and replacement of light bulb is convenient
6、Anti-knock bracket effectively prevents falling or life shortening of the bulb caused by strong vibration
7、Mated adjustment angle handles, Tool-Free, easy to adjust lighting angle

Hid light bulbs JR107 application

The color temperature of HID light bulbs ranges from 3000K to 12000k, of which 6000K is similar to that of sunlight, but contains more green and blue components, so it presents blue and white light. This blue and white light greatly improves the brightness of road signs and signs.Suitable for industrial building lighting, city flood lighting, especially for mobile lighting towers.

Hid light bulbs JR107 specification

Model No.:      JR107-1000W
Power(W):       1000W
Lamp:              HPS1000W-T
Lamp holder:   E40/E39
Luminous Flux:130000lm
CCT(K):            2000
Life Time：       18000H
Lamp Voltage:  100
N.W:     5.8KGS
G.W:     7.0KGS
Size:      470×470×350


Model No.:      JR107-1000W
Power(W):       1000W
Lamp:              MH1000W-TT
Lamp holder:   E40/E39
Luminous Flux:110000lm
CRI(Ra):            70
Life Time：       10000H
Lamp Voltage:  263
N.W:     5.8KGS
G.W:     7.0KGS
Size:      470×470×350



Hid light bulbs for sale


Hid light bulbs for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include hid light bulbs, LED Street Light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

Hid light bulbs Installation

HID light bulbs are generally composed of lamp head (xenon bulb), electronic ballast (also known as ballast, voltage regulator, fire ox, etc.), wire group control box, etc

1. Please cut off power before installation or changing spare parts
2. Please read the specification printed on fixture carefully before using
3. Please make sure the wire connection is well insulated and waterproof
4. Only professionals can do installation and maintenance

http://www.jr-lighting.com/jr107-15505578654026174.html

Factory best price 400W 600w hps/mh light UL,CUL,CE,ROHS approved.

High pressure sodium lamp was invented in 1960s. It is the highest light efficiency high intensity discharge lamp, known as the third generation of lighting source. High pressure sodium lamp is different from low pressure sodium lamp, its spectrum is no longer monochromatic yellow light, but spread in a wide frequency range. Through the relaxation of spectral lines, the high-pressure sodium lamp emits a golden white light, which can be used for color difference.

600w hps light JR106  description

1、High purity aluminum housing, high intensity, good heat dissipation
2、The reflective surface is polished and oxidized, uniform lighting, high reflectivity
3、Electrostatic spray coating on the surface of the light fixture, beautiful and durable
4、5mm tempered glass transparent cover, good light transmittance
5、Backside opening device, maintenance and replacement of light bulb is convenient
6、Anti-knock damping bracket, effectively prevents the falling or life shortening of the bulb caused by strong vibration
7、Mated adjustment angle handles, Tool-Free, easy to adjust lighting angle

600w hps light JR106 application

The 600W HPS light has the advantages of high luminous efficiency, low power consumption, long service life, strong fog permeability and no corrosion.Suitable for industrial building lighting, city flood lighting, especially for mobile lighting towers.



600w hps light JR106 specification


Model No.:      JR106-600W
Power(W):       600W
Lamp:              HPS600W-T
Lamp holder:   E40/E39
Luminous Flux:110000lm
CCT(K):            2000
Life Time：       18000H
Lamp Voltage:  100
N.W:     4.4KGS
G.W:     5.4KGS
Size:      385×385×440

Model No.:      JR106-600W
Power(W):       600W
Lamp:              MH600W-TT
Lamp holder:   E40/E39
Luminous Flux:110000lm
CRI(Ra):            70
Life Time：       10000H
Lamp Voltage:  263
N.W:     4.4KGS
G.W:     5.4KGS
Size:      385×385×440



600w hps light for sale
600w hps light for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include 600w hps light, LED Street Light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

600w hps light Installation

1. Please cut off power before installation or changing spare parts
2. Please read the specification printed on fixture carefully before using
3. Please make sure the wire connection is well insulated and waterproof
4. Only professionals can do installation and maintenance

http://www.jr-lighting.com/jr106-15505578468228666.html

Factory direct sale high power cheap hid flood lights exterior flood light fixtures

Exterior flood light fixtures is not a spotlight, projector or spotlight. It is mainly a kind of point light source that can irradiate evenly in all directions. Its irradiance range can be adjusted arbitrarily, and it is a regular octahedron icon in the scene. Exterior flood light fixtures are the most widely used light source in the production of renderings. Standard floodlights are used to illuminate the whole scene. For parking lot, billboard, playground (football field, tennis court, etc.), building external lighting, amusement park, airport, bridge, tunnel and other places.

Exterior flood light fixtures JR104  description

1、High purity aluminum housing, antic oxidation treatment, corrosion resistant, high intensity, heat dissipation
2、High temperature resistant silicone rubber gasket with superior sealing and anticorrosion performance
3、5mm thermostable ultra white tempered glass, good light transmittance, prolongs the life of lamp, resistance 7J
4、High strength bracket, polyester spray treatment, corrosion resistant, strong and durable
5、Equipped with a strong anti-vibration system, effectively improves the service life of lamps

Exterior flood light fixtures JR104 application

Exterior flood light fixtures are used in all walks of life and provide lighting at night in various outdoor environments.Suitable for stations, port installations, stadiums, buildings, construction sites, open-air square, light towers, mobile lighting equipment, etc.


Exterior flood light fixtures JR104 specification

Model No.:      JR104-1000W
Power(W):       1000W
Lamp:              MH1000W-TT
Lamp holder:   E40/E39
Luminous Flux:110000lm
CRI(Ra):            70
Life Time：       10000H
Lamp Voltage:  263
N.W:     6.4KGS
G.W:     7.9KGS
Size:      540×540×215


Model No.:      JR104-1250W
Power(W):       1250W
Lamp:              MH1250W-BT37
Lamp holder:   E40/E39
Luminous Flux:110000lm
CRI(Ra):            70
Life Time：       10000H
Lamp Voltage:  263
N.W:     6.4KGS
G.W:     7.9KGS
Size:      540×540×215


Exterior flood light fixtures for sale
Exterior flood light fixtures for sale,Shanghai JingRui lighting is a professional enterprise integrating research and design, production, sales and service.Our main products include exterior flood light fixtures, LED Street Light, LED Grow Light, HID Flood Light, Ballast and Bulb, etc. which are widely used for mobile light tower, construction sites, stadium, parking lot, road, ports and docks, etc. Free Quotes. Trained Specialists. Satisfaction Guaranteed.

Exterior flood light fixtures Installation

1. Please cut off power before installation or changing spare parts
2. Please read the specification printed on fixture carefully before using
3. Please make sure the wire connection is well insulated and waterproof
4. Only professionals can do installation and maintenance

http://www.jr-lighting.com/jr104-15505576340800131.html